Hongjia Grain Machinery Co., Ltd.

    Carefully and practically do well in the maintenance of the rice better, so that you can maintain in good working attitude,   You must first maintain below four things:   That is, the surface of the roller used in the  rice mill plant  should be level, the rice knife or sieving bar should be vertical without gaps, the rice sieve connector should be flush, the screw booster should be flush with the roller, and the roller and roller connector should be a flush direction.     Secondly, the roller rolling equipment should be kept in common with the spindle bearing to do a good job of balance and dynamic balance of the rotor. When the assembly  rice mill plant  is sprayed with rheumatism rollers, the rheumatism spray groove and the rheumatism spray hole on the spindle bearing must be pointed to prevent displacement.     After the spiral booster and the protruding rib of the feed iron roller are damaged, they should be replaced immediately.   The rice sieve is usually applied after one w